Steam Turbine and Generators for Thermal Power Plant

Prime Group in partnership with M/s Kaluga Turbines Works, Russia can provide turn-key solution as well as supply Turbo-Generator set or Steam Turbine depending on client’s requirement. We can provide our solutions/ services for thermal power project upto 75MW capacity. M/s Kaluga Turbines Works are largest Russian manufacturer of low and medium capacity steam turbines for power and other industries. More than 60 years of operation at international power market confirm high operational characteristics of Kaluga’ turbines.

Combined Heat & Power (CHP) Plant for Cogeneration Power Project

Prime Group in partnership with M/s SES Energiesysteme GmbH, Germany can provide turn-key solution as well as supply CHP Plant depending on client’s requirement. M/s SES Energiesysteme GmbH is one of the largest German manufacturers of low and medium capacity CHP plant for power and other industries offering innovative, cost-effective and environmentally-friendly energy systems.

SES Energiesysteme GmbH was founded in 1998 and has rich experience in construction, project planning, module manufacturing, plant construction and customer service. More than 250 sites with appr. 400 modules and generating sets are being serviced by SES Energiesysteme. Deutz Power Systems and MAN Gas Engines are integral part of our CHP systems who are renowned company in their field and stand for quality & reliability.

Energy Cogeneration: Combined heat and power cogeneration technology plays a important role in significant reduction of CO2 emissions as well as keep overall cost down because of its high efficiency. Cogeneration plants with gas engines utilize renewable energies and renewable agricultural products which makes them environmentally friendly.
In CHP plants heat is generated by means of fuels which is first turned into mechanical energy and finally with the use of a generator, into electrical power. During these conversion heat is produced that – contrary to conventional energy production- is not wasted to the atmosphere but is used for heating purposes or as process steam for manufacturing. This results into very low consumption of primary fuels i.e. very high efficiency.

CHP plant produce significantly low greenhouse gases (mostly CO2) as compared to conventional power plants. Also by using bio-mass – such as bio gas, liquid vegetable oils, ethanol, fossil fuels – emission of CO2 may be lowered even further. Burning bio-mass based fuels merely releases the same amount of carbon as stored during the growth process of the plants. Therefore it is closed and controllable cycle.

What we can offer you...

Prime Hi-Tech Infrastructure Ltd. undertakes Turnkey projects related to Power Generation, Transmission & Distribution and setting up of substations as well as other related projects associated with infrastructure developments in India and neighbouring countries. Main interest/ activities of division includes:-

 EPC Contracts for complete Switchyard upto 400kV and Transmission Lines

 Turnkey project of Power Plants specializing in Hydro Power projects

 Balance of Plant (BOP)

 Turnkey project for setting up factory with specialized machineries and systems.

 Setting up Solar Farms

 Associated Civil and Construction works.

 Supply, Erection, Installation, Testing & Commissioning of Electrical Equipments.

Why PHIL ?

Industry across all sectors throughout the world continues to grow in order to service rapidly growing economies. Prime Group is ideally placed to support this growth utilizing its experienced, multidisciplinary, multicultural and successful partnering strategies. We can provide single-point responsibility for execution of specialist EPC projects. The dedicated and flexible project task-force team and mutiple office locations are tailored to the needs of the project and our client. Our project approach is validated by our track record of successful specialist projects throughout the country.

Prime Group recognizes that EPC projects must be executed in strict accordance with the requirements as defined within the client’s contract specifications. To this end PHIL offers specialist EPC services to the main engineering and management companies as well as directly to owner operators. Project success is achieved through strict adherence to a fundamental Prime Group objective, that is, to provide our clients with a comprehensive range of multi-discipline services through all phases of project execution to the highest quality, on schedule, and within budget.

Our USP as a specialist EPC contractor

• Experienced project management teams
• Single-point responsibility
• Flexible and solution-driven
• Understanding clients’ needs and expectations
• Value engineering/design optimization
• Fast-track projects to schedule
• Available resources and facilities
• Execution of complex projects
• Highly skilled and motivated engineers
• Expert knowledge of international, local and client codes and practices
• Excellent safety statistics
• Operating for more than 24 years

We provide our clients with design and completion documentation through all phases of the EPC project, including:

• Design Reports and Manuals
• Mechanical Completion Dossiers
• Pre-Commissioning Dossiers
• Commissioning Dossiers
• Routine Test Reports
• Operation and Maintenance Manuals
• ‘As Built’ Drawings

International purchasing resources

Prime Group’s worldwide procurement resources enable us to bring the strength of an international purchasing organization to any project. We have sourced materials and equipment from all over the world and are fully conversant with all aspects of freight forwarding, including the complex issues of custom duty requirements, duty exemption procedures and special import license requirements. We have expediting and quality assurance teams active in all countries we operate from. Prime Group manages key procurement functions and strengths essential for sourcing the correct equipment in the most cost-effective way, with delivery on time.

Group Profile

Prime group is one of the leading Industrial Conglomerate functional in Energy/ Power sector and having experience in Turnkey Project execution, Testing & Measuring Equipments, Condition Monitoring, Predictive/ Preventive Maintenance Tools, Vibration Monitoring (Online as well as offline) etc. Our company has played virtually a pioneering role in making accessible the most sophisticated technology from Germany, France, Sweden, Canada, UK, South Africa and Denmark to various State Electricity Boards, Power Generating Plants, Electricity Supply Undertakings and other companies in India. The Group's intensely motivated, highly qualified and trained manpower of more than over 800 professionals in its completely automated offices and marketing network spread all over the country. The group having its offices in 27 locations spread a cross 14 major cities in the country and also a 100% subsidiary PCI Europe GmbH, with its headquarters at Berlin, Germany offers the best in service and quality.

The Prime Group began its operation in the year 1986 with Prime Chemfert Industries (Pvt.) Ltd. later named as PCI Limited with a clear focus to empower the priority sector with the latest technological advancements. Our esteemed customers to whom we have already served with our range of products and services are Gujarat Electricity Board, Andhra Pradesh State Electricity Board, Kerala State Electricity Board, Maharashtra State Electricity Board, Madhya Pradesh State Electricity Board, DVB, NDMC, NTPC, PGCIL, Tata Electric, BEST, Indian Railways, Surat Electricity Company, Calcutta Electric Supply Corporation, Bhilai Steel Plant, Vishakhapattnam Steel Plant, Indian Navy and many others.

One of our flagship companies, Prime Electric Ltd. is in the process of setting up a modern and state-of-the-art factory for EHV power transformer up to 1000 MVA / 500 KV with major focus on exports. The project is being set-up in joint venture with a European business house in 100 acres area in Special Economic Zone (SEZ) Naidupet, district Nellore in the Southern State of Andhra Pradesh. The location of this project is just 45 Km. from a large sea port called Krishnapattnam and in close proximity to the Ennore and Chennai Ports. Production from the proposed facility is scheduled to be rolled out by middle of 2010.

Contact us

Manish Gupta
Manager (Marketing)
EPC Projects/ Transformer Div.

Mb. +91-9311093000
Email: manish.gupta@msn.com
mgupta.power@gmail.com
manishgupta@prime-pci.com
Skype: mgupta.power